REFRIGERATOR-
FREEZER
ZBB 7266
INSTRUCTION BOOKLET
2223 445-22
Disposal of old Appliances
At the end of the Appliance
Life
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
•
When disposing of your appliance, use an
authorised disposal site.
•
Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
CONTENTS
Instructions for the User
Instructions for the
Installer
2
Important Safety Information
4
4
4
4
4
5
5
5
5
5
5
6
6
6
7
7
7
7
7
8
8
8
Operation
Before using
14
Technical Specification
15
15
15
Installation
Positioning
Control panel
Display
Shelf holders
Operation
16
17
Electrical Connection
Door Reversal
Temperature indication
Activation of operation
Switching off
Use of the refrigerator-Setting the temperature
Shopping function
Fresh food refrigeration
Normal operating sounds
Use of the freezer -Setting the temperature
Freezing fresh food
Frozen food storage
Thawing
Making ice cubes
Cold accumulators
Excessive temperature alarm
Moveable shelves
Positioning the door shelves
Freezing calendar
9
Hints and Tips
10
10
10
10
10
10
Maintenance and Cleaning
Internal cleaning
When the appliance is not in use
Changing the light bulb
External cleaning
Defrosting
11
12
12
13
Something Not Working
Service and Spare Parts
Customer Care
Guarantee Conditions
3
OPERATION
Do not use soap or detergent as the smell may
linger. Dry thoroughly.
Before using
Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water).
Control panel
C
B
E
D
F
A
D - Temperature and function indicator
E - Function button/ reset alarm
F - Fridge Thermostat control knob
A - Appliance button ON/OFF
B - Freezer Thermostat control knob
C - Temperature indication button
DISPLAY
5
6
3
4
1 2
1. If on, the indicated temperature is that of the
fridge compartment;
3. positive and negative Temperature indicator
4. Temperature indicator
if it flashes, the alarm corresponds to the
relative compartment.
5. If on, fast freeze function is on
6. If on, the shopping function is on
2. If on, the indicated temperature is that of the
freezer compartment;
if it flashes, the alarm corresponds to the
relative compartment.
Operation
After plugging the plug into the power outlet, if the
display is not illuminated, press button (A), appliance
on.
+5°C in the fridge
-18°C in the freezer
Important
As soon as the appliance is turned on, the following
signals will appear on the control panel:
If the door remains ajar for more than 7 minutes, the
internal lighting will turn off electronically; after this, the
lighting function will be reset by opening and closing
the door itself.
•
symbol (3) will be positive, indicating that the
temperature is positive.
•
the temperature flashes, the background of the
display is red and you will hear a buzzer. Press
button (E) and the buzzer will go off (also see the
section on "excessive temperature alarm").
By turning the knob the display flashes and shows
the desired temperature. For a correct storage of
the food the following temperatures should be set:
4
Temperature indication
Activation of functions
In normal conditions, the display indicates the freezer
temperature (symbol 2).
Each time button E is pressed, the following functions
are activated in a clockwise direction:
Each time button C is pressed, the display indicates in
sequence:
Symbol 5 : fast freeze function
Symbol 6 : shopping function
No Symbol: Normal operation
1. symbol 1 turns on and indicator 4 shows the
temperature of the fridge compartment;
Not more than one function can be activated at a time;
to de-activate the functions, press the button several
times until no icon appears.
2.symbol 2 turns on and indicator 4 shows the
temperature of the freezer compartment.
In any case, after 10 seconds normal display
conditions are restored.
Switching off
The appliance is shut off by pressing button (A) for
more than 1 second. After this, a countdown of the
temperature from -3 -2 -1 will be shown.
Use of the fridge
compartment
When the appliance is shut off, display (D) also goes
off.
Setting the temperature
In this condition, the function shopping cannot be
activated, and the lighting in the refrigerator
compartment will be switched off.
The temperature within the appliance is controlled by
the thermostat control knob situated at the top of the
appliance.
Important: If the fridge compartment is off, the
door must be closed in order that the freezer is
working properly .
In this condition, the electronic control of the
appliance functions automatically and
periodically circulating the air to prevent
unpleasant smells and humidity .
The temperature of this compartment may be
regulated by rotating the knob (F), and may vary
between more or less +2°C and +8°C.
When the knob is rotated, the display flashes and
indicates the set temperature. After having set the
desired temperature, if the knob is not rotated within
5 seconds, the temperature of the freezer
compartment will be indicated.
Shopping Function
To operate the appliance proceed as follows:
If you need to insert a large amount of warm food, for
example after doing the grocery shopping, we suggest
activating the Shopping function to chill the products
more rapidly and to avoid warming the other food
which is already in the refrigerator and/or freezer.
Turn the thermostat control beyond the «O» position.
Position
ꢀ
= minimum coldness
Position ꢀ = maximum coldness
Turn the thermostat dial to the required position.
The shopping function is activated by pressing button
E (several times if necessary) until the corresponding
The intermediate position is usually the most
suitable.
icon appears
The thermostat setting can vary as the temperature
inside the appliance depends on the following
factors:
The shopping function shuts off automatically after
approximately 6 hours.
It is possible to de-activate the function at any time by
pressing button E (see paragraph "Function
Activation").
–
–
–
–
room temperature
how often the door is opened
how much food is stored
position of the appliance
Fresh food refrigeration
To obtain the best performance, do not store warm
food or evaporating liquids in the refrigerator; cover
or wrap the food, particularly if it has a strong flavour.
To shut off the refrigerator compartment, rotate the
knob (F) anticlockwise till position "O". In this position
the word "OF" is indicated for 5 seconds. The freezer
compartment will keep on working.
Do not cover the shelves with any protective
material, such as paper, cardboard or plastic, which
may obstruct the air circulation.
We suggest placing the knob in the middle position to
obtain an internal temperature of approximately +5° C.
To help you use your refrigerator correctly, here are
some more useful hints:
Once the refrigerator compartment is shut off, the
only temperature which is indicated is that of the
freezer compartment.
Raw meat (beef, pork, lamb & chicken or poultry):
5
wrap in polythene bags and place on the glass shelf
above the salad drawers.
Normal Operating Sounds
•
You may hear faint gurgling or bubbling sounds
when the refrigerant is pumped through the coils
or tubing at the rear, to the cooling
plate/evaporator.
Meat can only be stored safely in this way for
one or two days at the most.
Fruit & vegetables: these should be thoroughly
cleaned and placed in the salad drawers.
•
•
When the compressor is on, the refrigerant is
being pumped round, and you will hear a whirring
sound or pulsating noise from the compressor.
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.
A thermostat controls the compressor, and you
will hear a faint ’click’ when the thermostat cuts in
and out.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
Use of the freezer compartment
Freezing fresh food
Temperature control
The freezer compartment is suitable for long term
storage of commercially frozen food, and for freezing
fresh food.
The maximum quantity of foods to freeze in 24 hours is
shown on the serial number plate.
The temperature within the freezer is controlled by
the thermostat situated at the top of the cabinet.
The temperature of this compartment may be
regulated by rotating the knob (B), and may vary
between more or less -15°C and -24°C.
Place the foods you want to freeze on the shelf of the
freezer compartment, as this is the coldest point.
When the knob is rotated, the display flashes and
indicates the set temperature. After having set the
desired temperature, if the knob is not rotated within
5 seconds, the temperature of the freezer
To freeze fresh foods, you will need to activate the fast
freeze function. Press button E (several times if
compartment will be indicated.
necessary) until the corresponding icon appears
After a pre-cooling period of 24 hours, place the foods
in the freezer.
To operate the freezer proceed as follows:
Turn the thermostat control beyond the «ꢀ» position.
The freezing process takes 24 hours. During this
period do not put other foods in the freezer.
When you first start the freezer, we suggest that you
turn the thermostat control to a medium setting.
This function stops automatically after 54 hours.
However, if the appliance is working in unfavourable
room conditions such as
Put the foods to be frozen in the compartments of
the freezer, as per the diagram.
-
-
-
poor ventilation,
high temperature,
frequent door openings,
it may be necessary to select a more suitable
setting.
X
We suggest setting the knob to the middle position to
obtain an internal temperature of approximately
-18°C, which guarantees proper freezing and
conservation of the frozen foods.
The function can be de-activated at any time by
pressing button E (see paragraph "Activation of
Functions").
Distribute the frozen food packages in the other
compartments, so that the top compartments can be
used for a further freezing operation.
-
-
-
The food to be frozen must be fresh and of the
best quality.
Do not allow fresh food to touch food which is
already frozen.
During the freezing process, ensure that the
freezer door remains closed.
6
Frozen food storage
Making ice cubes
The appliance is provided with one or more trays for
ice-cubes trays.
When you first start the freezer or if the freezer has
been out of use for some time, we advise you to run
your appliance for at least 24 hours in the «fast
freeze» mode before storing frozen food.
Fill the tray(s) 3/4 full to give the ice space to expand
and place them in the freezer compartment.
Do not exceed the storage period indicated by the
manufacturer.
To release the ice cubes simply give the tray a slight
twist.
Finally, do not open the door frequently or leave it
open longer than is absolutely necessary.
Do not use sharp or metallic instruments to remove
the trays from the freezer.
Cold accumulators
The appliance is equipped with two cold
accumulators. If there is a power outage, they will
extend food conservation for a few hours.
Warning
Do not put carbonated liquids, (fizzy drinks etc.), in
the freezer compartment.
Excessive temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an power failure)
is indicated by:
Water ices, if consumed immediately after removal
from the freezer, can possibly result in a low
temperature skin burn.
Do not remove items from the freezer if your hands
are damp/wet, as this could cause skin abrasions or
“frost/freezer burns”.
- flashing temperature;
- freezer compartment flashing (symbol 2);
- red illumination of display;
Important
- sounding of buzzer.
When normal conditions are restored:
- the acoustic signal shuts off;
- the temperature value continues to flash;
- the display illumination remains red.
In the event of a power cut the food in the freezer will
not be affected if the power cut is short and if the
freezer is full. Do not open the door. Should the food
begin to thaw, it must be consumed quickly and must
not be re-frozen .
When you press button "E" to de-activate the alarm,
the highest temperature reached in the compartment
appears on indicator 4 for approximately 5 seconds.
At this point the flashing stops and the display
illumination changes over from red to white.
Thawing
Deep frozen or frozen food, prior to being used, can
be thawed in the fridge or at room temperature
depending on the time available. Small food items
may even be cooked from frozen; in this case
cooking will take longer.
During the alarm phase, the buzzer can be switched
off by pressing button E; the illumination of the
display remains red until normal storage conditions
are restored.
Any frozen food which is allowed to thaw accidentally
should either be eaten as soon as possible or thrown
away. Alternatively, if the food is uncooked and has
not been completely defrosted it can be cooked and
then refrozen.
Meat, fish and fruit should be thawed in the
refrigerator compartment and small pieces of meat
can even be cooked while still frozen, but you must
ensure that it is thoroughly cooked through.
Vegetables should be directly immersed in boiling
water; ready-cooked dishes can be placed directly in
the oven in their aluminium wrapping.
A microwave oven is particularly suitable for thawing
any type of frozen or deep-frozen food: follow the
oven instructions, particularly regarding the
placement of aluminium wrapping or containers in
the oven.
Defrosted cooked food must never be refrozen.
7
Moveable shelves
The walls of the refrigerator have runners so that the
shelves can be positioned as desired .
For better use of space, the front half-shelves can lie
over the rear ones.
D338
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.To make
these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes off, then reposition as required.
Freezing Calendar
The symbols show different types of frozen goods.
The numbers indicate storage times in months for the appropriate types of frozen goods.Whether the upper or lower
value of the indicated storage time is valid depends on the quality of the foods and pre-treating before freezing.
8
HINTS AND TIPS
Food Storage
In the Event of a Power Failure
•
To obtain the best results from your appliance,
neither hot foods nor liquids which may
evaporate, should be placed in the larder
compartment.
If there is a power failure during the storage of frozen
foods, keep the door closed. If the temperature within
your freezer should rise do not refreeze the food
without checking it’s condition. The following guide-
lines should assist you.
•
•
Keep the time between buying chilled food and
placing it in your fridge as short as possible.
Do not push food together too much, try to allow
air to circulate around each item.
Ice Cream:
Once thawed should be discarded.
Fruit and Vegetables:
If soft should be cooked and used up.
Bread and Cakes:
•
•
Do not store food uncovered.
Remove suspect food from your refrigerator and
clean, refer to ‘Maintenance and Cleaning’.
Can be refrozen without danger.
Shellfish:
•
•
Ensure that food placed in the freezer is dated
and labelled and used in date order to ensure
that food is consumed at its best.
Should be refrigerated and used up quickly.
Cooked Dishes:
i.e. casseroles, should be refrigerated and used up.
Large Pieces of Meat:
Can be re-frozen providing there are ice crystals
remaining within them.
Avoid buying frozen food if you cannot store it
straight away. The use of an insulated container is
advisable. When you arrive home place the frozen
food in the freezer immediately.
Small Joints:
Should be cooked and then re-frozen as cooked
dishes.
Chicken:
Energy Saving Advice
•
Do not install the cabinet close to sources of
heat, i.e. boiler or radiator.
Should be cooked and re-frozen as a fresh dish.
•
Locate the appliance in a cool well ventilated
room and make sure that the air openings of the
cabinet are not obstructed.
•
•
•
•
•
Avoid unnecessary frosting in the cabinet by
packing all foodstuffs into airtight packages
before placing them in the freezer.
Always leave warm food to cool down to room
temperature before placing in the fridge or
freezer.
Food which is to be frozen (when cool) should be
placed in the fridge before being transferred to
the freezer.
Thaw frozen food in the fridge. This will ensure
safer defrosting of foods and reduce the work of
the refrigeration unit.
Try to avoid keeping the door open for long
periods, or opening the door too frequently as
warm air will enter the cabinet, and cause the
compressor to switch on unnecessarily often.
•
Ensure there are no obstructions preventing the
door from closing properly.
9
MAINTENANCE AND CLEANING
Before any maintenance or cleaning work is carried
out, DISCONNECT the appliance from the
ELECTRICITY supply.
Changing the light bulb
Should the interior light fail to work, first switch off
the appliance and disconnect from the electricity
supply, then replace the bulb as follows;
Internal cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
Important : Insert the 2 upper shelves in the
original position after leaving them for cleaning .
NEVER USE DETERGENTS, ABRASIVE
POWDERS, HIGHLY PERFUMED
CLEANING PRODUCTS OR WAX
POLISHES,TO CLEAN THE INTERIOR AS
THESE WILL DAMAGE THE SURFACE AND
LEAVE A STRONG ODOUR.
When the appliance is not in use
press on the rear hook and at the same time slide the
cover in the direction indicated by the arrow.
Unscrew the bulb and replace it with one of the same
power (the maximum power is shown on the light
diffuser) available from your nearest Service Force
Centre.
When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all
foods and clean the appliance, leaving the doors ajar
to prevent unpleasant smells.
External cleaning
Replace the light cover by sliding it into its original
position.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage the
plastics used in this appliance. For this reason it
is recommended that the outer casing of this
appliance is only cleaned with warm water with a
little washing-up liquid added.
Defrosting
Refrigerator
The refrigerator automatically defrosts. The water is
discharged, via the pipe, into a tray located at the
back of the appliance above the compressor, where
it evaporates.
An accumulation of dust will affect the performance
of the appliance and cause excessive electricity
consumption.
You MUST ensure that the appliance is switched
OFF.
Freezer
Your appliance is frost free, which means there is no
need to manually defrost your appliance as this will
be carried out automatically.
Once or twice a year dust the condenser (black grill)
and the compressor at the back of the appliance,
with a brush or vacuum cleaner, see diagram.
PR259
10
SOMETHING NOT WORKING
Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation a charge will be made, even if the appliance is under guarantee.
Before contacting your local Service Force Centre, check the following points:
Symptom
Solution
No power to the appliance
Check there is power at the socket.
Check there is not a power cut by checking the
household lights.
Check the fuse has not blown.
The light does not come on
Ensure that the bulb is correctly fitted.
Replace the bulb if it has blown.
Check the door light switch is not jammed.
The temperature in the fridge or freezer section is
too high
Check the thermostat control knob in the fridge is
turned to the correct setting relative to ambient
conditions.
Check the ambient temperature is within the
appliance’s operating limits, please refer to the
installation section in this instruction book.
Relocate the appliance if necessary.
The freezer door will not open
Has door just been opened? If so leave for a few
minutes to allow the air pressure to equalise.
The compressor runs continuously
Adjust the thermostat control knob to give correct
temperature control. See “Setting the temperature”.
Check that the doors are closed.
Large quantities of food have recently been placed in
the cabinet and/or door is frequently opened.
Check that air ventilation is not obstructed.
Ensure the doors are not left open.
Excessive frost and ice has built up
Check that nothing is preventing the doors from
closing.
Is the door gasket intact and clean.
Noise
Refer to normal operating sounds.
11
SERVICE AND SPARE PARTS
In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local
Zanussi Service Force Centre by telephoning:-
0870 5 929929
Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
For the address of your local Service Force Centre and further information about Service Force, please visit the
Before calling out an engineer, please ensure you have read the details under the heading ‘Something Not
Working?
When you contact the Service Force Centre you will need to give the following details:
1.
2.
3.
4.
5.
Your name, address and post code
Your telephone number
Clear and concise details of the fault
The model and serial number of the appliance (found on the rating plate)
The purchase date
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee
service calls.
CUSTOMER CARE DEPARTMENT
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products,
please contact our Customer Care Department by letter or telephone at the address below or visit our website
Customer Care Department
Major Appliances
Zanussi
Addington Way
Luton
Bedfordshire
LU4 9QQ
Tel: 08705 727 727 ( * )
* calls to this number may be recorded for training purposes.
12
GUARANTEE CONDITIONS
Standard guarantee conditions
We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part
thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair
or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:
The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
instructions.
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not
authorised by us.
All service work under this guarantee must be undertaken by a Zanussi Service Force Centre. Any appliance or
defective part replaced shall become the Company’s property.
This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the
European Community (EC) or European Free Trade Area.
Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
The guarantee starts from the date you first purchased your product.
The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of
use for this brand or range of products.
This guarantee relates to you and cannot be transferred to another user.
Your new home is within the European Community (EC) or European Free Trade Area.
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your
new home. They will then ensure that the local Service Organisation is aware of your move and able to look
after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)3 44 62 29 29
+49 (0)800 234 7378
+39 (0)0434 39 4700
+46 (0)8 672 53 90
+ 44 ( 0) 8705 727727
Nürnberg
Pordenone
Stockholm
Luton
Sweden
UK
13
TECHNICAL SPECIFICATIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
230-240 V / 50 Hz
160 W
AVERAGE DAILY UNITS ELECTRICITY *
GROSS CAPACITY
0.91 kWh
Fridge
164 l
162 l
Freezer
NET CAPACITY
Fridge
91 l
78 l
Freezer
STAR RATING
* This figure is based on standard test results in accordance with European Standard EN 153.
Actual consumption will depend on how the appliance is used and where it is located.
14
INSTALLATION
Important
Warning
It must be possible to disconnect the appliance from
the mains power supply; the plug must therefore be
easily accessible after installation.
IF YOU ARE DISCARDING AN OLD APPLIANCE
THAT HAS A LOCK OR CATCH ON THE DOOR,
YOU MUST ENSURE THAT IT IS MADE
UNUSABLE TO PREVENT YOUNG CHILDREN
BEING TRAPPED INSIDE.
Depending upon the position which you choose for
your appliance, you may wish to reverse the way in
which the door opens. To do this, refer to instructions
on “Door reversal directions”.
Positioning
This appliance should only be installed at a location
where the ambient temperature corresponds to the
climate classification indicated on the rating plate,
which is located at the left on the inside of the
appliance.
The following table shows which ambient
temperature is correct for each climate classification:
SN +10°C to + 32°C
N
+16°C to + 32°C
ST +18°C to + 38°C
+18°C to + 43°C
T
It should be located in a dry atmosphere, out of
direct sunlight and away from extreme temperature
e.g. not next to a boiler or radiator, or in a very cold
room e.g. an outhouse . If these temperatures are
exceeded i.e. colder or warmer, then the appliance
may not operate correctly.
For building-in and door reversibility, if necessary ,
refer to the relevant instructions in the following
pages.
Shelf holders
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
A
To remove them proceed as follows:
Raise the shelf from the back, push it in the direction
of the arrow until it is freed and remove the retainers.
B
15
The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BSI362 fuse. Only
ASTA or BSI approved fuses should be used.
Electrical connections
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the plug.
WARNING:THIS APPLIANCE MUST BE
EARTHED.
A replacement cover/carrier must be obtained from
your local Service Force Centre.
The manufacturer declines any liability should
this safety measure not be observed.
This appliance complies with the E.E.C. Directive
No. 87/308 of 2.6.87 relative to radio interference
suppression.
If the plug that is fitted to your appliance is not
suitable for your socket outlet, it must be cut off and
the appropriate plug fitted.
This appliance complies with the following
E.E.C. Directives:
Remove the fuse from the cut off plug.
-
-
73/23 EEC of 19.2.73 (Low Voltage Directive)
and subsequent modifications;
The cut off plug should then be disposed of to
prevent the hazard of shocks in case it should be
plugged into a 13amp socket in another part of your
home.
89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Please ensure that when the appliance is
installed it is easily accessible for the engineer in
the event of a breakdown.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green andYellow
Blue
- Earth
- Neutral
- Live
Brown
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not correspond
with the markings identifying the terminals in your
plug, proceed as follows:
GREEN & YELLOW
13 AMP. FUSE
BROWN
BLUE
CORD CLAMP
D207
Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
«E» or the earth symbol
yellow.
or coloured green and
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
16
Instructions for totally built-in
appliances
Door reversal
The appliance is supplied with the right
or left door opening.To change the opening
direction of the door proceed as in the
following instructions before installing it.
1. Unscrew the upper pin and remove the spacer.
2. Remove the upper pin and the upper door.
3. Unscrew the middle hinge.
4. Remove the lower door.
S
5. Unscrew the lower pin and refit it on the opposite side
6. Refit the lower door.
7. Rescrew the middle hinge und the covers on the
opposite side.
8. Refit the upper door and rescrew the hinge pin and
the spacer on the opposite side.
Recess dimensions
min.
50 mm
200 cm2
Height
Depth
Width
(1)
(2)
(3)
1780 mm
550 mm
560 mm
To ensure adequate ventilation, allow the clearances
shown in figure.
min.
200 cm
2
D567
Furthermore, it is necessary that the cabinet has a
ventilation recess with the following dimensions:
depth
width
50 mm
540 mm
3
2
1
PR01
17
Make sure that a distance of 44 mm is maintained in
the lower part between the kitchen furniture and the
border of the appliance.
1
The lower hinge cover inserted in the accessories
bag, is useful to guarantee the exact position of the
kitchen furniture and the appliance.
44mm
Also make sure that the appliance does not clamp
the mains cable
2
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
I
I
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
D724
From the plastic cover (E), which is used to cover the
hinge with the pivot pin, you must take away the part
as indicated in the drawing.
This operation is made easer since there is, in the
internal part of the cover hinge lid a groove that
facilates the removal of this coomponent.
“Remove the part marked with DX, if the pivot pin is
inserted in the right hinge, SX in opposite case.”
Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap vent grille (B) and hinge covers (E) into
position.
C
D
E
E
B
18
Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
Hb
Ha
Hc
Hd
PR266
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
ca. 50 mm
90°
90°
ca. 50 mm
Fix cover (Hc) on guide (Ha) until it clips into place
Ha
Hc
8mm
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
Ha
Hb
PR167
Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
8mm
K
Ha
19
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Hb
PR168
Fix cover (Hd) on guide (Hb) until it clips into place.
Hb
Hd
PR167/1
Fix the appliance to the side of the kitchen unit, fit
the bracket (E)and (F), adjust the distance , and fix
using the screws (as in figure). Fit the cover (D).
F
After completion of the door reversing operation,
check that the door gasket adheres to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of
the gasket or accelerate this process by heating
up the part involved with a normal hairdryer on a
low setting.
20
|