EW19S4JW
SAFETY AND WARNINGS
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this Television near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
Television (including amplifiers) that produce
heat.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
Never place heavy or sharp objects on the
LCD panel or frame.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protected the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the Television.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this Television during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
Television has been damaged in any way, such
as; power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the Television, the Television has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
14) Only use attachments/accessories specified
provided by the manufacturer, the product is
supplied by AC adapter, the AC adapter is used
as disconnect device, the disconnect device
shall remain readily operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
This Westinghouse product has earned the
ENERGY STAR® for meeting U.S. Federal
energy efficiency guidelines as set by the
Department of Energy and Environmental
Protection agency. The ENERGY STAR®
program exists to provide energy saving
guidelines and help promote energy efficient
products and practices. Changes to certain
features, settings and functions of this TV can
change and/or increase its power consumption.
Depending on how settings are changed, power
consumption may exceed the limits required
for ENERGY STAR® qualification.
16) No naked flame sources, such as lighted
candles, should be placed on the Television.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of Television in moderate climate.
WARNING:
To reduce the risk of fire or electric shock, do
not expose this Television to rain or moisture.
-2-
SAFETY AND WARNINGS
High voltages are used in the operation of this television
receiver. Do not open the cabinet.
Refer servicing to qualified service personnel.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual and/or damage
to the television may result if it falls.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Do not block the ventilation holes on the back cover of the TV.
Adequate ventilation is essential to prevent failure of
electrical components.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
or near the television.
Dim:515*320mm(不
包
括
底
座
）
Do not trap the power supply cord under the television
receiver's stand.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the life of your television, and can also
be dangerous.
-3-
INTRODUCTION
Accessories
Main features
■
■
■
■
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home
theater experience
Power cable...................................
Infrared Remote Control....................
User’s Manual .................................
Battery(AAA)...................................
1
1
1
2
■
■
■
■
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Full-function Remote Control
Main parameter
Viewing Picture Size (diagonal)
Resolution:
19 inches
1366 x 768
Power supply
AC 100-240V 50/60Hz
30W
Power consumption
Audio Output Power (THD 7%):
Aspect Ratio:
2x3W
16:9
TV System:
ATSC Digital system and NTSC Analog system
NTSC
Video Signal System:
Receiving Channel:
Cable :1-135/ Air: 2-69 (ATV&DTV)
High-Definition Multimedia Interface (HDMI) Input
x 2
x 1
YCb(Pb)Cr(Pr) Input
Composite Video Input
Analog RGB (VGA) Input
Audio Input
x 1
x 1
x 2
Headphone Output
Coaxial Output
x 1
x 1
Horizontal definition (TV line)
Composite Video Input >=350
Video Input
YCb(Pb)Cr(Pr)
>=400
>=400
-4-
Base Stand Assembly Instruction
1. Attach the stand base plate to the stand pole by firmly tightening the supplied screw to be
a completed stand.
2. Place the TV with the display side down on a flat surface. Use a cloth to protect the display.
Position the completed stand into the hole on the TV set.
-5-
INSTALLATION
Side panel
Front panel
SOURCE
1
2
MENU
CH+
3
CH-
VOL+
3
4
5
VOL-
STANDBY
1
2
30 30
1. SOURCE: Display the input source menu.
2. MENU: Display main MENU.
3. CH+/CH-: In TV mode, press "CH+" or "CH-" to
change the channel up and down. In MENU mode, press
"CH+" or "CH-" to select items in standby mode, press
"CH+" or "CH-" to turn on the TV.
1: Remote control sensor.
2: Indicator LED: BLUE
RED
4. VOL+/VOL-: Adjust sound level. In MENU mode,
press "VOL+ " or "VOL- " to adjust the item that you
selected.
POWER ON.
STANDBY.
5. STANDBY: Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
3: Side panel keys
REAR Connections
R
L
VIDEO
Pr
Pb
Y
All the terminals are (from left to right):
AUDIO INPUT, VIDEO, YPbPr INPUT
Note: AV and YPbPr share one audio channel.
SIDE Connections
VGA
HEADPHONE PC AUDIO COAXIAL
RF
HDMI1
HDMI2
USB
All the terminals are (from left to right):
HDMI1, HDMI2, USB, VGA, HEADPHONE, PC AUDIO, COAXIAL, RF.
Note: 1. When HDMI1 has an input signal coming from a DVI source then the audio input signal must be
connected to the PC audio input.
2. When HDMI2 has an input signal coming from a DVI source then the audio input signal must be
connected to the YPbPr/AV audio input.
3. The USB port just used for upgrading
-6-
INSTALLATION
ANTENNA
Note:
Aerial connections: IEC (female).
Input impendance:75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are set to
Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This sequence is very important.
VGA
HEADPHONE PC AUDIO COAXIAL
RF
HDMI1
HDMI2
USB
-7-
INSTALLATION
PC
PRESET MODE
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
4
720*400
70
60
31.47
31.47
37.50
37.88
46.88
48.36
640*480
75
60
75
60
640*480
800*600
800*600
1024*768
5
6
7
8
9
1024*768
1024*768
70
75
56.48
60.02
1280*1024
1280*1024
1366*768
60
75
60
63.98
80.00
47.70
10
11
-8-
INSTALLATION
AV EQUIPMENT
You can use the input terminals on TV set rear as follows.
VGA
HEADPHONE PC AUDIO COAXIAL
RF
HDMI1
HDMI2
USB
HDMI
VIDEO EQUIPMENT with YPbPr
G
B
R
W
R
Y
W
R
Yellow (video)
White(audio L)
Red(audio R or Pr)
Blue(Pb)
B
G
Green(Y)
G
R
B
R
W
R
L
VIDEO
Pr
Pb
Y
R
W
VIDEO EQUIPMENT
W
R
TO VIDEO
OUTPUTS
TO AUDIO OUTPUTS
The television's inputs can be connected to the following types of equipment: VCR, multi disc player,
DVD, camcorder, video game or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i.
-9-
REMOTE CONTROL
1: POWER
To turn the TV on.
2: NUMBER KEY
For direct access to channels.
3:
Displays the main on-screen menu.
4: CURSOR
To move within the menu.
5: EXIT
To exit the menu.
6: VOL+/-
To adjust sound level.
7: P.M
To switch picture mode.
8:
Press to display and select the available video sources.
9: MUTE
To disable or enable the sound.
10: RECALL
To access the previously viewed channel.
11: ENTER
Confirms selection.
12: TV DISPLAY
Displays/removes the program information
13: S.M
To switch sound mode.
14: CH+/CH-
To access the next or previous channel.
15: ASPECT
To change picture aspect .
16: CH LIST
To display the channel list.
17: EPG
To display all the information of DTV programs.
18: FAV
To access your favorite channels in digital TV mode.
19: HDMI
Hot key to go directly to HDMI source.
20: AV
Hot key to go directly to AV source.
21: DTV STRENGTH
To display the DTV signal strength menu.
22: TV
Hot key to go directly to TV source.
23: YPbPr
Hot key to go directly to YPbPr source.
24: CC
To enable or disable the CC function.
25: VGA
Hot key to go directly to VGA source.
26: MTS
To switch the sound stereo.
27: COLOR KEYS
Reserved keys
-10-
OPERATION
1. PICTURE MENU
3. SETUP MENU
The first item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
The third item of the MENU is SETUP MENU.
You can setup system here.
Press
to exit.
to select, press
to adjust, press MENU
Press
to exit.
to select, press
to adjust, press MENU
Note:
Note:
Restore Default: Reset all the settings to default
value.
If you want to adjust contrast, brightness, color,
and sharpness, the picture mode must return to
“Custom”status.
3.1. Parental Controls:
Press
button to select Parental Controls, Press
Advanced Video:
button, the screen will display as follow:
Press
button to select Advanced Video, press
button, the screen will display as follow:
Enter the password, it will go into Parental Control
menu. Factory default password is 6666.
2.AUDIO menu
The second item of the MENU is AUDIO MENU.
You can adjust sound here.
Press
to exit.
to select, press
to adjust, press MENU
RAW
Note:
Audio language is available in ATSC/TV Programming
only.
-11-
OPERATION
Change Password:
Press
button, the screen will display as follow:
Content
S
FV
V
L
D
Rating Content
(Fantasy (Violence) (Sexual
(Adult
(Sexually
violence)
situation) language) suggestive
dialog)
TV-Y (All
children)
TV-Y7(Direct to
X
order children)
Suggested
age
TV-G(General
audience)
TV-PG(Parental
Guidance
X
X
X
X
X
X
X
X
X
X
X
suggested)
TV-14(Parents
strongly
cautioned)
TV-MA(Mature
audience only)
1).Old password: Input the old password
2).New password: Input the new password
3).Confirm password: Input the new password again
And use the ENTER key to switch lock/ unlock Parental
Control feature.
P.G Switching:
When the Parental Control switch is ON, the below
options listed below can beadjusted.
2).MPAA: Switching the movie-rating control level;
N/A, G, PG, PG-13, R, NC-17, X.
US: Press
follow:
button, the screen will display as
Rating
Description
G
General audiences, All Ages admitted
Parental Guidance suggested. Some material may not be
Suitable for children.
PG
Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
PG-13
R
Age
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
NC-17
X
No one 17 and under admitted.
X
is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
Canada: Press
button, the screen will be
displayed as follow:
1:TV: Press button, the screen will display as
follows:
1): Canada English: Switching the English rating control
level: EXEMPT, C, C8+, G, PG, 14+, 18+.
-12-
OPERATION
3.2 Timer
Description
Rating
You can adjust the timer here.
Press
to select, press
to adjust, press MENU
E
C
Exempt: Includes news, sports, documents and other information
programming: talk shows, music videos, and variety programming.
Children: Intended for younger children under the age of 8 years.
Pays careful attention to themes that could threaten their sense of
securityand well-being.
to exit.
C8+ Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen .
G
General: Considered acceptable for all age groups, Appropriate
viewing for the entire family, contains very little violence, physical,
verbal or emotional.
PG Parental Guidance: Intended for a general audience, but may not be
suitable for younger children (under the age of 8) because it could
contain controversial themes or issues.
Age
14+
Over 14 Years: Could contain themes where violence is one of the
dominant elements of the storyline But it must be integral to the
devel opment of plot or character. Language usage could be profane
and nudity , present within the context of theme.
18+ Adults: Intended for viewers 18 years and older and might contain
depictions of violence, which while related to the development of
plot, character or themes, are intended for adult viewing. Could
contain graphic language and portrayals of secretary and nudity.
Sleep Timer: Adjust this item to set the sleep timer.
Note:
Time zone, DST and the clock are available in ATSC
programming only, and the Clock can't be adjust.
2).Canada French: Switching the French-rating control
level: E, G, 8ANS+, 13 ANS+, 16ANS+, 18ANS+.
3.3 Closed Caption: Switching close caption mode.
Rating
Description
Press
button to select Closed Caption, Press
button, the screen will display as follow:
E
Exempt programming
G
General :All ages and children, contains minimal direct violence,
but may be integrated into the plot in a humorous or unrealistic
manner .
8ans+ General but inadvisable for young children :May be viewed by a
wide public audience, but could contain scenes disturbing to
children under 8 who cannot distinguish between imaginary and
real situations. Recommended for viewing with paren.
Age
13ans+ Over 13 years: Could contain scenes of frequent violent scenes
and in tense violence.
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent
violent scenes and extreme violence.
RRT setting: in ATSC digital TV mode, it can be
adjusted
1):Advanced selection: only ATSC program is available.
2):Option: Used to edit CC font.
Reset RRT: Press
button, the screen will be
Press
button, the screen will display as follow:
displayed as follow:
NOTE: Only ATSC program is available.
-13-
OPERATION
3.4 Menu Settings
You can adjust the Menu Settings here.
1). Air/Cable: select Air TV signal and cable TV signal.
2). Auto Scan: If it's the first time you use the TV, you
should scan all the TV channels first,
Press
to select, press
to adjust, press MENU
to exit.
press the
menu:
button to confirm, you will see the
3.5 VGA Settings: When PC Mode is available.
Press
button to select VGA Settings, Press
select“yes”item and press the ENTER button to
confirm, You will see the message below which
indicates auto search is in process.
button, the screen will display as follow:
1).H-Pos: Adjust the horizontal position of the screen.
2).V-Pos: Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
3). Favorite: Press
favorite channel.
4). Show/Hide: Press
current channel.
button to choose/delete the
button to display or hide
5).Auto: Auto adjust to fit the screen.
4. Channel MENU
5). Channel NO. :Display the current channel number.
The fourth item of the MENU is Channel MENU.
6). Channel label: Press
name.
7). DTV signal: Display DTV strength signal. It can't be
selected and adjusted.
button to edit current channel
You can adjust digital and analog TV Channels.
Press
to select, press
to adjust.
-14-
SE-UM-1901-1201
|